Belkin F9K1002 Скачать руководство пользователя

Страница: 48 / 50

ReGUlaTORY InfORMaTIOn

fCC statement

DeClaRaTIOn Of COnfORMITY WITH fCC RUles

fOR eleCTROMaGneTIC COMPaTIbIlITY

We, Belkin International, Inc., of 12045 E. Waterfront Drive, Playa

Vista, CA 90094, declare under our sole responsibility that the device,

f9K1002 V4, complies with Part 15 of the FCC Rules. Operation is

subject to the following two conditions: (1) this device may not cause

harmful interference, and (2) this device must accept any interference

received, including interference that may cause undesired operation.

Caution: exposure to Radio frequency Radiation .

The device shall be used in such a manner that the potential

for human contact normal operation is minimized.

This equipment complies with FCC radiation exposure

limits set forth for an uncontrolled environment. This

equipment should be installed and operated with a minimum

distance of 20cm between the radiator and your body.

federal Communications Commission notice

This equipment has been tested and found to comply with the

limits for a Class B digital device, pursuant to Part 15 of the FCC

Rules. These limits are designed to provide reasonable protection

against harmful interference in a residential installation.

This equipment generates, uses, and can radiate radio frequency

energy, and if not installed and used in accordance with the

instructions, may cause harmful interference to radio communications.

However, there is no guarantee that interference will not occur

in a particular installation. If this equipment does cause harmful

interference to radio or television reception, which can be determined

by turning the equipment off and on, the user is encouraged to try and

correct the interference by one or more of the following measures:

• Reorient or relocate the receiving antenna.

• Increase the distance between the equipment and the receiver.

• Connect the equipment to an outlet on a circuit different

from that to which the receiver is connected.

• Consult the dealer or an experienced radio/TV technician for help.

FCC Caution: Any changes or modifications not expressly

approved by the party responsible for compliance could

void the user’s authority to operate this equipment.

This device and its antenna(s) must not be co-located or

operating in conjunction with any other antenna or transmitter.

Содержание F9K1002



















































Результаты поиска

Содержание F9K1002

Отзывы:

Похожие инструкции для F9K1002

Бренды по названию

Популярные бренды

Belkin F9K1002, Руководство пользователя

Результаты поиска

Содержание F9K1002

Отзывы:

Похожие инструкции для F9K1002

Бренды по названию

Популярные бренды