F5D7234-4 v4 Wireless G Router User Manual Rev1
Page 46 of 61
4. Try shutting down and restarting your computer, then rerunning the Setup
Assistant.
If the Setup Assistant is still unable to find the Router, reference the section
titled “Manually Configuring Network Settings” for installation steps.
Problem:
The Setup Assistant cannot connect my Router to the Internet.
Solution:
If the Setup Assistant is not able to connect the Router to the Internet, please
check the following items:
1. Use the troubleshooting suggestions within the Setup Assistant. If the
troubleshooting screen does not open automatically, click on the
“Troubleshoot” button in the lower, right-hand corner of the Setup Assistant
window.
2. If your ISP requires a user name and password, make sure that you have
typed in your user name and password correctly. Some user names require
that the ISP’s domain be at the end of the name. Example:
“[email protected]”. The “@myisp.com” part of the user name may need
to be typed as well as your user name.
If you continue to have no Internet connection, reference the section titled
“Manually Configuring Network Settings” (page 86 of this User Manual) for
alternate setup method.
Problem:
• The Setup Assistant completed installation, but my web browser doesn’t work.
• I am unable to connect to the Internet. The Router’s “Modem” light is off and
the “Internet” light is blinking.
Solution:
If you cannot connect to the Internet, the “Modem” light is off, and the “Internet”
light is blinking, the problem may be that your modem and Router are not
connected properly.
1. Make sure the network cable between the modem and the Router is
connected. We strongly recommend using the cable that was supplied with
your cable or DSL modem for this purpose. The cable should be connected
at one end to the Router’s “Modem” port, and at the other end to the network
port on your modem.
2. Unplug the cable or DSL modem from its power source for three minutes.
After three minutes, plug the modem back into its power source. This may
force the modem to properly recognize the Router.
3. Unplug the power to your Router, wait 10 seconds, and then reconnect the
power. This will cause the Router to reattempt communication with the
