27
STEP 3a: Set up your computers for networking
9. NetSetup now needs to now if you want to create a client setup floppy
disk. If you have more computers than you need to setup to work with
the Router, click “Yes”. This will save some files to the disk that your
other computers can use to make setup easier. If you are not going to
setup any more computers, click “No” and skip to step 11.
10. If you clicked “Yes”, you will be prompted to insert a floppy disk into
the PC’s floppy disk drive. Label a floppy disk “Belkin Networking
client setup disk” or something else that you will remember easily and
insert it into the floppy disk drive. Click “OK.”
11. After the client setup disk has been created, you will be prompted to
restart your computer. Please restart your computer.
Configuring Additional Computers Using Belkin NetSetup Software
(Win 98/Me)
Now that the first computer has been configured you are ready to
configure the other PCs on your network.
1. You should now be working with the next computer. Click “Start”,
“Programs”, “Belkin SOHO Networking” then “Belkin NetSetup” to
launch the easy-to-use computer configurator. The following screen
will appear:
