10
Powering Up the Systems
Verify that all computers connected to the PS/2 KVM Switch are powered on.
If any connected computers have not been powered on, it is okay to do so at
this time (computers can be powered on simultaneously). The PS/2 KVM Switch
emulates both a mouse and keyboard on each port and allows your computer to
boot normally. Your PS/2 KVM Switch is ready to use.
The computer connected to port labeled “PC1” will be displayed on the
monitor. Check that the keyboard, monitor, and mouse are working normally.
Check all occupied ports to verify that all computers are connected and
responding correctly. If you encounter an error, check your cable connections
for that computer and reboot. If the problem persists, please refer to the
“Troubleshooting” section in this User Manual.
Installation
P74529ea_F1DJ10xP_uk.indd 10
10/01/2008 10:37:44
