Belkin 54g Скачать руководство пользователя страница 91

Страница: 91 / 98

TROUBLESHOOTING

The Easy Install Wizard is
not able to find my Router.

The WAN link LED is not on
or I cannot connect to the
cable or DSL modem.

1. Make sure that the Router is ON. The

Power/Ready light will be on GREEN and
SOLID. Check the power supply connection at
the wall and the Router.

2. Make sure that the LAN link light that

corresponds to the port you connected to
the computer is ON. Check the network cable
going from the computer to the Router.

3. If the Easy Install Wizard told you that it

detected multiple network adapters, run the
Easy Install Wizard again and try a different
adapter.

1. Check the connection between the Router

and the cable or DSL modem. Make sure the
network cable from the cable or DSL modem
is connected to the port on the Router
labeled “Internet/WAN”.

2. Make sure the cable or DSL modem is

powered and switched on.

3. Make sure the Router has power. The

Power/Ready LED should be illuminated.

4. Make sure the cable between the modem and

the Router is the cable that was provided
with the modem.

Содержание 54g



































































































Результаты поиска

Содержание 54g

Отзывы:

Belkin 54g, Руководство пользователя, Страница: 91 / 98

Результаты поиска

Содержание 54g

Отзывы: