ALTERNATE SETUP METHOD
1.4
Connect a new network cable (not included) from the back of the computer
to one of the ports labeled “1–4”.
Note: It does not matter which numbered
port you choose.
1.5
Turn your cable or DSL modem on by reconnecting the power supply to
the modem.
1.6
Before plugging the power cord into the Router, plug the cord into the wall,
then plug the cord into the Router’s power jack.
1.7
Verify that your modem is connected to the Router by checking the lights
on the front of the Router. The green light labeled “WAN” should be ON if
your modem is connected correctly to the Router. If it is not, recheck your
connections.
1.8
Verify that your computer is connected properly to the Router by checking
the lights labeled “LAN 1,2,3,4”. The light which corresponds to the
numbered port connected to your computer should be ON, if your computer
is connected properly. If it is not, recheck your connections.
25
25
Mac or PC computer that was
originally connected to the
cable or DSL modem
New network cable
(to computer)
Existing network cable
(came with modem)
Cable or
DSL modem
To
Power Adapter
