USING THE WEB-BASED ADVANCED USER INTERFACE
57
6.
You will see the Router’s user interface in the browser window. Click “Wireless
Bridge”
(2)
on the left-hand side of the screen. You will see the
following screen.
7.
Check the box that says “Enable ONLY specific Access Points to connect”
(1)
.
8.
In the field named AP1
(3)
, type in the MAC address of your secondary
Access Point. When you have typed in the address, click “Apply Changes”.
9.
Bridging is now set up.
(1)
(2)
(3)
