BELINEA 10 55 70, Руководство по обслуживанию

Страница: 7 / 80

To avoid risk of electric shock, before
moving the anode cap, made sure tdhe
ode has been completely discharged as
high voltage may remain on the anode for
extended time after power off.
9. Remove the anode cap the CRT. Refer to the figure
2-3
10. Remove the nylon revets holding from Bezel. Refer to
the figure 2-3 (I).
2.4. Removing the Neck Board
Main Board
1.
Remove the screw from
U
Bracket. Refer to the figure
(A).
2-4 Remove the Control Panel
Figure Remove the Neck Board and Main
Board
2 Remove the two Lock Caps from the
nylon ties.
Refer to
the figure 2-5 (A).
3 . Remove the two ground wires from the Neck Shield.
Refer to the figure 2-5 (B).
4 . Remove the Neck Shield.
5 . Remove Neck Board.
6.
Remove the Main Board.
Remove the Control Board
1. Remove the two screws from Control Panel. Refer to
the figure
2-4
2.
Remove the Control Panel.
3 . Remove the six screws from Control Board. Refer
to the figure 2-6 (A).
4.
Remove the Control Board.
Figure
Remove
Control
Board