BELIMED CS 720, Руководство по обслуживанию

Страница: 16 / 62

4. Installation
4.1 Introduction
Installation of the Belimed CS 720 must be performed by Belimed Technicians as they have
received detailed training on all aspects of the installation, assembly, and maintenance of the
Belimed CS 720. Belimed is involved in every installation in order to be able to insure the
warranty of the system for the accepted duration.
4.2 Installation Drawing
Belimed provides each customer an installation drawing for each project. The Installation drawing
should be used to prepare the site in advance of the installation date. The Installation drawing will
show any necessary modifications to an existing site and specify the final location of all utilities as
required by the Belimed CS 720.
4.3 Installation Considerations
4.3.1 Loading Dock
During the unloading process it will be necessary to park a 20’ container at the loading dock
for approximately 4 hours. The loading dock needs to be of level height with a normal
delivery truck. If a loading dock is not available, a forklift must be provided.
4.3.2 Space Considerations
A clear path from the loading dock to the installation site is required to move the
components. The largest piece is 6”x63”x99.5”. Please confirm a safe route is available for
this item.
If the unit is not going to be assembled at the time it is delivered then ample storage space
for the equipment must be provided. The minimum storage area required is 150 square feet
and should contain a minimum of 33 linear feet of wall space. This area will also be used as
a staging area during the installation.
4.3.3 Service Power Outlet
One convenience outlet (110/120V) is required for installation and servicing of the
equipment and the use of power tools.
CS 720 Service Manual Revision 1.1 Page 8