BELGACOM TWIST 508, Руководство пользователя

Страница: 12 / 66

8
Handsfree
While having a conversation with your
contact, you can enable the handset. Press
Menu .
Select Handsfree using or and press
Activate .
The message Handsfree on appears on the
screen. Increase or decrease the audio
volume using
or .
Transfer or call from another handset
This function is only accessible when two
handsets or more are registered to the same
base. During communication, you can
transfer the call to another handset.
During communication, press Menu .
Using the or arrow, select Internal call .
Press Confirm .
The list of handsets registered to the base
appears.
Select the handset you want to call using
or . Press Call .
The handset called rings, once someone
picks up transfer the call by pressing the red
key .
When pressing the green key
while engaged in a conversation
you automatically activate the
handsfree mode of the handset, by
pressing it again you deactivate the
handsfree mode.
During communication
During communication, you can receive a
second incoming call or place a call to a
second contact. You can then switch from
one contact to the other.
You may also set a three party conference if
the second call has been set from your
terminal (depending on your subscription).
The following instructions are applicable if
you have subscribed to "caller number" or
"caller waiting" - service. In all the other
cases you have access to these functions via
the sequence Options, Operator Service.
Receiving a second call whilst on line
During the call, you will hear a beep to tell you
that there is a second call waiting. A screen
will show the second caller's details.
Press Accept to take this new call.
Your other caller is then put on hold and you
can talk with your second caller.
Making a second call whilst on line
During communication, you can put your
contact on hold and call a second one by
pressing Menu .
Select Make 2nd Call using or . Press
Confirm .
To retake the call before it is picked
up by the handset called, press
Menu .
Using the or arrow, select
Hanging up . Press Activate .
G
ETTING STARTED