M800LMR Mainboard User’s Manual
26
Floppy Drive
Swap
If you have two diskette drives installed and you
enable this item, drive A becomes drive B and
drive B becomes drive A.
Floppy Drive
Seek
If you enable this item, your system will check all
floppy disk drives at start up. Disable this item
unless you are using an old 360KB drive.
Primary Display
Use this item to determine the display devices for
the primary display of your computer.
Password Check
If you have entered a password for the system,
use this item to determine if the password is
required to enter the Setup Utility (
Setup
) or
required both at start-up and to enter the Setup
Utility (
Always
).
Boot to OS/2
Over 64MB
Enable this item if you are booting the OS/2
operating system and you have more than 64MB
of system memory installed.
Internal Cache
Leave this item enabled since all the processors
that can be installed on this board have internal
cache memory.
External Cache
Leave this item enabled since all the processors
that can be installed on this board have external
cache memory.
System BIOS
Cacheable
If you enable this item, a segment of the system
BIOS will be cached to main memory for faster
execution.
Graphic Win Size
This item determines the operation of the
onboard graphics adapter. We recommend that
you leave this item at the default value.
DRAM Integrity
Mode
Use this item to define the kind of error correction
supported by the memory that you have installed.
Memory Hole
This item can be used to reserve memory space
for some ISA expansion cards that require it.
DRAM Burst
Refresh
Use this item set the burst refresh for the
installed DRAM.
