M800LMR Mainboard User’s Manual
30
Load Best Performance Settings
If you select this item and press
Enter
a dialog box appears. If you
press
Y
, and then
Enter
, the Setup Utility loads a set of best-
performance default values. These default are quite demanding and
your system might not function properly if you are using slower
memory chips or other low-performance components.
Features Setup Page
This page sets some of the parameters for peripheral devices
connected to the system.
AMIBIOS SETUP – PERIPHERAL SETUP
©1998 American Megatrends, Inc. All Rights Reserved
OnBoard FDC Enabled
OnBoard Serial Port1 3F8h/COM1
OnBoard Serial Port2 2F8h/COM2
OnBoard IR Port Disabled
IR Mode
HPSIR
IR Port IRQ
N/A
OnBoard Parallel Port 378h
Parallel Port Mode Normal
Parallel Port IRQ 7
Parallel Port DMA
N/A
OnBoard IDE Both
USB Function Enabled
USB Function for DOS Disabled
Ultra DMA Support Disabled
ESC : Quit
↑↓←→
: Select Item
F1 : Help PU/PD/+/- : Modify
F5 : Old Values (Shift)F2 : Color
F6 : Load Optimal values
F7 : Load Best performance values
OnBoard FDC
Use this item to enable or disable the onboard
floppy disk drive interface.
OnBoard Serial
Port1
Use this item to enable or disable the onboard
COM1 serial port, and to assign a port address
OnBoard Serial
Port2
Use this item to enable or disable the onboard
COM2 serial port, and to assign a port address
OnBoard IR
Function
Use this item to define the protocol for an
infrared port if you have installed an optional IR
port. The choices are IrDA and ASKIR.
IR Mode
Use this item to define if the optional infrared
port is HSPIR or ASKIR.
