BELGACOM Forum 526, Руководство по монтажу и пусконаладке, Страница: 70 / 232

Configuring the Forum 525/526 68
Configuration
Preconfiguration
Configuration of the Forum 525/526 can be prepared by a Belga-
com agent. For this purpose, a Forum 525/526 installed here is
programmed with the customer data (e.g. user data, call distribu-
tion schemes, cord-bound terminals). This data is stored and then
loaded into the Forum 525/526 at the customer’s site by a service
technician.
This prepared configuration must be completed at the customer’s
site (LAN configuration and DECT terminals).
For configuration of the Forum 525/526 Internet functions, first
ask the responsible system administrator for details of the cus-
tomer’s LAN prerequisites.
Remote Configuration
The Forum 525/526 configuration can be edited or updated by the
Belgacom Customer Service Centre via a remote access connec-
tion or via an Internet connection (reverse ssh tunnel). In the fac-
tory setting on delivery, two Belgacom Remote Service Centre tel-
ephone numbers are preset, under which a system technician can
dial into the Forum 525/526.
Connection via ISDN
The connection for remote configuration is established using an
internal RAS access. The RAS access is activated when a data call
from one of the registered phone numbers is registered. During
remote configuration, the Forum 525/526 is blocked for RAS
access by any further users.
If no RAS access has been configured in the Forum 525/526 Con-
figurator, you can use a code procedure to release the internal
RAS access for remote configuration, and then block it again. The
manual activation is automatically cancelled 30 minutes after the
last configuration activity. You can add additional phone numbers
for remote configuration on the configurator’s
Telephony :
Extended : Remote service menu page. Activate the ISDN
option for the desired phone numbers.