manualshive.com logo in svg

BELGACOM Forum 520, Руководство пользователя

Поделиться
Скачать
BELGACOM Forum 520 Скачать руководство пользователя страница 18

Add-ons

14

System Telephones on the Forum 500 / Forum 5000

Module 2nd Forum Phone

A Module 2nd Forum Phone is an adapter with a U

pn

 interface (1) 

for connecting an additional Forum Phone, and a socket for an AC 
adapter (2).

You can use the AC adapter on the Forum Phone 520 and on the 
Forum Phone 530. 

Note:

Please operate only the AC adapter with the part no. 

900 263 33 on the Module 2nd Forum Phone.

Module 2nd Forum Phone (U

pn

 adapter) on the back of the 

Forum Phone 520

In order to install an adapter, you have to remove the cover from 
the back of the Forum Phone. Insert the U

pn

 adapter in the socket 

until it snaps into place. It is possible to install adapters during 
operation: you do not have to disconnect the telephone from the 
system in order to do this. 

Note:

In the case of a Forum Phone 530 you can plug a U

pn

 

adapter into either of the two sockets. However, you can only 
operate one U

pn

 adapter on each Forum Phone 530.

Using the U

pn

 adapter you can connect an additional 

Forum Phone 520 or Forum Phone 530as a second telephone. A 
second telephone connected via a U

pn

 adapter is completely inde-

pendent of the first one. Connection via adapter is not a parallel 
connection.

When connecting a second telephone, you require a UP cable. Use 
this cable to connect the additional Forum Phone to the U

pn

 

adapter (1) on the first telephone.

The 2-wire UP cable must not exceed 30 m in length. Depending 
on the length of the cable and the type of Forum Phone connected 
as a second telephone, there may be insufficient feed power. This 
could result in a decrease of the ringer volume and the open 

2

1

Содержание Forum 520





































































































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды