BELGACOM Forum 510, Руководство пользователя

Страница: 14 / 58

10 Making a Call
press the redial key several times (on-hook). The last five tele-
phone numbers dialled are displayed consecutively. When you
lift the handset the displayed telephone number is dialled.
Automatic Redial
If you attempt to make a call and fail to get through your
Forum Phone 510 can automatically redial the number.
You make a call but fail to get through. Press
AutoDl.
and
replace the handset.
Your Forum Phone 510 now initiates a redialling attempt every
90 seconds, for a maximum of five attempts. If dialling is suc-
cessful (i.e. your call gets through), your Forum Phone 510 rings
as it would for an incoming call. To terminate autodial, press
Cancel
.
Automatic Callback
If you fail to get through to the party called because the line is
busy you can initiate an automatic callback.
As soon as the desired party has finished his/her call your tele-
phone rings just as though the other party had called you back.
Press the
CallBck
softkey.
After a few seconds a message appears telling you that your
callback request has been received and saved by the ISDN. You
can now hang up.
A callback request is saved by the network, not in your tele-
phone or the telephone of the dialled party. This means that
automatic callback is not possible from all subscriber’s phones
and in these cases an error message appears. To delete a call-
back request press the
Disconn
softkey when the callback is
signalled.
The connection charges for the callback service are normally
incurred by you.*