BELGACOM Belgafax 710, Руководство пользователя, Страница: 35 / 72

8. Fax 35
8.
Fa
x
2 Use
/
to select the resolution that you would like
to use as the new standard setting for fax transmis-
sion. Confirm with
OK .
Suppressing the Header
If you do not want your sender identification (= header)
to appear on outgoing messages, you can suppress the
display of the header:
Æ
Please note that many recipients have config-
ured their machines to reject messages with-
out sender identification.
1 Press MENU/OK and
272
.
2 Use
/
to select OFF , and confirm with OK . The
header will be suppressed.
Setting the Transmission
Speed
If you frequently send messages to networks with poor
line quality, you can reduce the transmission speed.
Æ
A slower transmission speed ensures better
transmission quality, but increases the time
required for the transmission.
1 Press MENU/OK and
273
.
2 Use
/
to select the desired transmission speed.
Confirm with OK .
Echo Protection
Particularly for transmissions overseas, feedback (= echo)
can result in disruptions. Activate the echo protection
to ensure flawless transmission.
Æ
Transmission with echo increases the trans-
mission time. However, the data are transmit-
ted with greater reliability.
1 Press MENU/OK and
274
.
2 Use
/
to select
ON
and confirm with OK . The
echo protection is activated.
Display Information
Configure which information should be shown on the
display during transmission.
1 Press MENU/OK and
276
.
2 Use
/
to select one of the following options:
speed
—The transmission speed is displayed
page number —The page number of the page cur-
rently being sent is displayed
3 Confirm with OK .
Printing a Time Stamp
Your multifunction machine prints an additional re-
ceipt stamp (= time stamp) on the lower edge of incom-
ing fax transmissions. You have the option of turning
this function off.
1 Press MENU/OK and
277
.
2 Use
/
to select
off
. To activate it, select
on
.
Confirm with OK
Reception Speed
If you frequently receive fax messages from networks
with poor line quality, you can reduce the reception
speed.
1 Press MENU/OK and
278
.
2 Use
/
to select the desired reception speed. Con-
firm with OK .
E.C.M.
Your multifunction machine is equipped with Er-
ror Correction Mode (E.C.M.). E.C.M. prevents data
losses resulting from poor telephone lines by requesting
faulty data packets again. E.C.M. must be supported by
both the transmitting and receiving machines.
Æ
With the standard settings, E.C.M. is acti-
vated because this does not result in increased
telephone charges when the telephone lines are
good.
1 Press MENU/OK and
279
.
2 Use
/
to select OFF and confirm with OK .
E.C.M. is deactivated.
²
Return to the last menu entry with C ; return
to the starting mode with
X
.