V e l o c i t y K V M E x t e n d e r P r o d u c t M a n u a l , R e v . F , O c t . 2 0 2 1
Page 20
HARDWARE
Contents
When you receive your Thinklogical VelocityKVM Extender
®
, you should find the following items:
•
VelocityKVM Extender Transmitter
•
VelocityKVM Extender Receiver
•
AC power cord, PWR-000006-R (International connections may differ)
– Qty 2
•
VelocityKVM Extender Cables
✓
Video Cable, 2 Meters
– See Technical Specs, pg. 17
✓
Audio Cable Kit (8 pcs.), 6 Feet, KIT-000005-R
– Qty 1
•
VelocityKVM Extender Product Manual CD
•
Product Quick Start Guide
All physical connections to the product use industry-standard connectors.
Desktop or Rack Mount Device
You may choose to place your unit on a shelf or desktop (rubber feet included), or rack-mount it using
the supplied mounting brackets (EIA 19
” rack mountable). The front panel should be visible and
unobstructed so that the front panel buttons and LCD display are accessible. All connections are made
to the rear of the chassis. The VelocityKVM Extender chassis does not need to be opened or accessed.
The sturdy metal case allows units to be stacked as needed.
8 Mounting bracket
screws
DVI TWO DISPLAY
Velocity
kvm-28
Fiber Optic Transmitter
2 Mounting bracket screws
in four places.
RACK-MOUNT OR DESK-TOP
OPTIONS:
All Thinklogical KVM
extenders can be mounted in a
standard EIA 19" rack or on a shelf or
desk-top.
Each mounting bracket is secured
by four screws and can be safely
removed from the transmitter or
receiver unit for desk-top mounting
after power has been removed from
the unit.
All screws should be reinstalled after
the brackets have been removed.
Mounting Bracket Removal
Cooling
The VelocityKVM Extender System uses
two DC fans
to move air
horizontally through the chassis. For
Transmitters
, the fans will not turn
on unless the internal temperature exceeds 40°C. For
Receivers
, the
fans will always run at low power to keep the unit’s temperature within
range and to reduce ambient noise.
Note: Be sure to leave a minimum of 2
” ventilation space on
both sides of the units, especially if the units are being
stacked.
2 Fans per Chassis