V e l o c i t y K V M E x t e n d e r P r o d u c t M a n u a l , R e v . F , O c t . 2 0 2 1
Page 37
VelocityKVM 5 Video Front Panel Menu
TRANSMITTER
Display
Modifiable Description
* Video
VGA Connected
NO An indication of whether VGA video is input to the Vis TX.
Resolution input
NO Active pixels x active lines vertical rate.
Hor. Freq
NO Horizontal frequency.
Auto Phase
YES
Automatically adjusts the Sampling Phase to the best setting.
PLL Total
YES
Total pixels, 1 line. (Horiz. active Horiz. blanking pixels).
HSOUT Width
YES
Horizontal sync (Hsync) of video, measured in pixels.
DE Start
YES
Horizontal back porch (Hpb) of video, measured in pixels.
DE Width
YES
Total active pixels in one line.
Line Start
YES
Vertical back porch (Vbp) + Vertical sync (Vsync) of video,
measured in lines.
Line Width
YES
The number of visible lines in one frame.
Hsync Period
NO Used to determine analog video horizontal frequency.
Use the following formula to calculate the frequency:
(25x10E6 x 16) / Hsync Period = Horizontal Frequency
Vsync Period
NO Total lines in one frame of video = active lines + blanking lines.
ISL Sync Status
NO
Thinklogical support use only.
Measures sync selection and
………
sync polarity.
ISL Sync Activity
NO
Thinklogical support use only.
Measures sync activity.
Video 1 cnt.
NO
Thinklogical support use only.
Video IN pixel clock (in hex).
___________________________________________________________________________
RECEIVER:
*System
LS Connected
NO
Indicates fiber status from TX to RX (0=connected).
Tx Ctrl Name
TX (Tx only) Name entered on TX unit is displayed on RX unit.
KM Device
NO
Revision of the VelocityKVM portion that plugs into CPU.
KM Remote Host
NO
Revision of the VelocityVKM Host on the RX unit.
KM Local Host
NO
Revision of the VelocityVKM Host on the TX unit.
TX Control
NO
Revision of the TX unit laser and front panel control.
RX Control
NO
Revision of the RX unit laser and front panel control.
FPGA Version
NO
Revision of the FPGA used for video generation.
Serial Number
NO
2 digits: week, 2 digits: year, 2 to 4 digits unique unit number
Debug Values
YES Factory Use.
Allow FPGA Update
YES Select YES to enable update.
SFP Loss of Signal
NO
Indicates loss of SFP signal. (1=not connected).
SFP Des OK Signal
NO
1=Yes 0=No
LS FPGA Ver.
NO
Low Speed Data communication FPGA.
Vid1. FPGA Rev.
NO
Video FPGA revision for Head 1.
Vid1. FPGA Type
NO
Video FPGA type for Head 1.
Temp in Celsius
NO
Tb=PCB temp (max=70) Tf=FPGA temp (max=85)
KMASS Card ID
NO
0E=original, OA= SoDimm
KMASS FPGA Rev.
NO
FPGA used for LS/USB 2.0 Card.
KMASS Device ID
NO
Hardware ID of KMASS Card.
Video Card ID
NO
Hardware ID of Video Card.
