Page 1
TLX12 Matrix Switch Product Manual
thinklogical
Rev. E, Oct., 2019
Section 1: TLX System Features
The Logical Solution
The TLX12 is an ultra-compact 10G high performance non-blocking matrix switch that supports
full, uncompressed 4K video with full color depth at 60Hz frame rate for complete, end-to-end
routing of video and peripheral signals over multi-mode or single-mode fiber-optic cable in a
single 1 RU Chassis.
The TLX12 provides mission critical dependability and unrivalled signal integrity. Being protocol agnostic,
the switch supports DVI, SDI, HD-SDI, Dual-link DVI, Dual-link SDI, USB HID, USB 2.0 and audio.
The TLX1
2
Matrix Switch is available with
12 LC-type
fiber connectors or
12 RJ45
CATx
connectors.
HYBRID SWITCHING SOLUTION
For Uncompressed, High Resolution Video & KVM Systems
Thinklogical’s TLX Matrix Switches are
high performance, non-blocking switches
for complete end-to-
end switching of video, audio and peripheral signals
over multi-mode or single mode fiber-optic cable
or CATx cable
.
TLX switches are
protocol agnostic
, supporting most video, audio and peripheral signals and allow users
to consolidate all system switching requirements in a single chassis. TLX Matrix Switches are ideal for
small or large system applications, with switch sizes ranging from
12 ports to 1280 ports
. Each port
supports
10Gbps
bandwidth, preserving signal integrity to provide
uncompressed, high resolution video
with no artifacts, lat
ency or lost frames. Thinklogical’s re-clocking technology ensures that every video
and data stream is delivered in perfect synchronization.
SECURITY
Creating physical separation between potential threats (users) and the target (secure data) is essential
t
o a secure system design. Thinklogical’s system permits users to
access sources up to 80 kilometers
away, with no performance degradation
. System administrators can safeguard sources in a
centralized location, allowing users to maintain remote access to the sources, but with no means to
breach the system, either accidentally or intentionally (such as downloading sensitive information onto a
USB drive).
PARTITIONED AND RESTRICTED SWITCHING
To
protect data between multiple networks
, partitioning allows the switch resources to be divided to
support more than one network without allowing switching between networks. Restricted switching
allows the administrator to manage access on a port-by-port basis. Partitioned and restricted switching is
enabled through the s
witch’s firmware, which means a threat would have to physically access the switch
to tamper with the settings
.
(See
Appendix C, Secure Applications
on 29.)
Note: CATx Matrix Switching applications do not offer an EAL4 rated level of security.
CATx is not available with the TLX80.
