Belden Hirschmann SPIDER II 8TX, Руководство пользователя

Страница: 6 / 29

6
SPIDER II
Release 04 09/09
Warning!
Never insert sharp objects (small screwdrivers, wires, etc.) into
the inside of the product. There is the risk of an electric shock.
„
Environment
The device may only be operated at the specified maximum ambient tem-
perature (temperature of the ambient air at a distance of up to 5 cm (1.97
in) from the device) and relative air humidity.
Install the device in a location where the climatic threshold values
specified in the technical data are adhered to.
Only to be used in an environment with the contamination level speci-
fied in the technical data.
„
Qualification requirements for personnel
Qualified personnel as understood in this manual and the warning signs,
are persons who are familiar with the setup, assembly, startup, and oper-
ation of this product and are appropriately qualified for their job. This in-
cludes, for example, those persons who have been:
X
trained or directed or authorized to switch on and off, to ground and to
label power circuits and devices or systems in accordance with current
safety engineering standards;
X
trained or directed in the care and use of appropriate safety equipment
in accordance with the current standards of safety engineering;
X
trained in providing first aid.
„
General safety instructions
Electricity is used to operate this equipment. Comply in every detail with
the safety requirements specified in the operating instructions regarding
the voltages to apply (refer to page
4 ).
Non-observance of these safety instructions can therefore cause material
damage and/or serious injuries.
Only appropriately qualified personnel should work on this device or in
its vicinity. These personnel must be thoroughly familiar with all the
warnings and maintenance procedures in accordance with this oper-
ating manual.
The proper and safe operation of this device depends on proper han-
dling during transport, proper storage and assembly, and conscien-
tious operation and maintenance procedures.
Never start operation with damaged components.
Only use the devices in accordance with this manual. In particular, ob-
serve all warnings and safety-related information.
Any work that may be required on the electrical installation may only
be carried out by personnel trained for this purpose.