Belden Hirschmann OZD Genius G12, Руководство пользователя

Страница: 43 / 68

5 Technical Data
41
Version 05 07/2014
Repeater OZD Genius G12 OZD Genius G12-1300
Ord. code 933 989-021 934 233-021
Voltage/power supply
Operating voltage 24 V DC (19 … 35 V DC), non-interchangeable, Safety extra-low
voltage
Current consumption 200 mA
Power consumption 4.8 W
Signaling contact
Maximum switch voltage 30 VDC; 42 VAC (safety extra-low voltage)
Maximum switch current 1.0 A
Maximum switching capacity 30 W (resistive load)
Signal transmission
Transmission rate 153.6 kBit/s, 76.8 kBit/s, 38.4 kBit/s
Cascadability not limited
Signal processing time Approx. 800 ns at 153,6 kBit/s
(any input /output) Approx. 1400 ns at 76,8 kBit/s
Approx. 2500 ns at 38,4 kBit/s
Electrical port
Input/output signal Genius bus
Genius cable
- Length < 250 m
- Attenuation at 1 MHz < 8 dB for 150 ž cable
< 5 dB for 100 ž cable
Connection capability Max.32 terminal data devices
Terminator Must be attached outside to connector
Electrical isolation
– Shielding in / Shielding out Yes
– Data lines / Housing Yes
Optical interface
Typ. wavelength 860 nm 1310 nm
Launchable optical power
– into fiber E 10/125 – –19 dBm
– into fiber G 50/125 –15 dBm –17 dBm
– into fiber G 62.5/125 –14 dBm –17 dBm
– into fiber S 200/230 (HCS
®
) –10 dBm –
Receiver sensitivity –26 dBm –27 dBm
Transmission distance with 2 dB
1)
or 3 dB
2)
system reserve / line attenuation
– with fiber E 10/125 (0.5 dB/km) – 0 - 10 km / 8 dB
1) 3)
– with fiber G 50/125 (1.0 dB/km) – 0 - 7 km /10 dB
2)
– with fiber G 62.5/125 (1.0 dB/km) – 0 - 7 km / 10 dB
2)
– with fiber G 50/125 (3.0 dB/km) 0 - 2.7 km /11 dB
2)
–
– with fiber G 62.5/125 (3.5 dB/km) 0 - 2.6 km /12 dB
2)
–
– with fiber S 200/230 (HCS
®
) (8.0 dB/km) 0 - 1.5 km /16 dB
2)
–
Optical connector BFOC/2.5 (ST
®
)
5 Technical Data
3) The specified distance allowed between two OZD Genius G12-1300 must not be exceeded regardeless of the optical power budget.