manualshive.com logo in svg

Belden Hirschmann MACH102 Series, Руководство пользователя

Поделиться
Скачать
Belden Hirschmann MACH102 Series Скачать руководство пользователя страница 13

Installation MACH102

Release 07 12/2020

13

CE marking

The labeled devices comply with the regulations contained in the following 
European directive(s): 

2014/30/EU (EMC)
Directive of the European Parliament and of the Council on the 
harmonisation of the laws of the Member States relating to 
electromagnetic compatibility.

2011/65/EU and 2015/863/EU (RoHS)
Directive of the European Parliament and of the Council on the restriction 
of the use of certain hazardous substances in electrical and electronic 
equipment.

2014/35/EU
Directive of the European Parliament and of the Council on the 
harmonisation of the laws of the Member States relating to the making 
available on the market of electrical equipment designed for use within 
certain voltage limits.

In accordance with the above-named EU directive(s), the EU conformity 
declaration will be at the disposal of the relevant authorities at the 
following address:
 
Hirschmann Automation and Control GmbH
Stuttgarter Str. 45-51
72654 Neckartenzlingen
Germany

www.doc.hirschmann.com/certificates.html

 
The product can be used in the industrial sector.

Interference immunity: EN 61000-6-2

Emitted interference: EN 55032

Safety: EN 62368-1
 

Warning!

 This is a class A device. This device can cause interference in 

living areas, and in this case the operator may be required to take 
appropriate measures.

LED or laser components

LED or LASER components according to IEC 60825-1 (2014):
CLASS 1 LASER PRODUCT
CLASS 1 LED PRODUCT

Содержание Hirschmann MACH102 Series































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды