Belden HIRSCHMANN IT MAMMUTHUS MTM8000 Series, Руководство пользователя

Страница: 48 / 65

48
Install MAMMUTHUS switch
Issued in December, 2020
6 Remove
6.1 Remove the power module
Operate in the following steps:
 Wear the anti-static bracelet, and confirm that the anti-static bracelet
can be reliably earthed.
 Turn off the power switch.
 Unlock the power cable, and unplug the power line.

Unlock the power module, and pull it out.
 Use the cover plate to seal the slot of the medium module on the basic
device.
6.2 Remove the fan module
Operate in the following steps:
 Wear the anti-static bracelet, untighten the two anti-loosening screws on
the lower and upper parts of the fan module with Phillips screwdriver.
 Pull the handle of the fan module with one hand, hold the fan frame of
the fan module with the other hand, pull out the fan module stably along
the guide rail of the slot, and place the dismantled fan module onto the
antistatic cushion or initial packing box.
 Use the cover plate to seal the slot of the medium module on the basic
device.
 Fix the cover plate with two (2) screws on the basic device.
You may check the tightening torque in "General Technical Data" on
Page 50.
6.3 Remove SFP transceiver
Operate in the following steps:
 Unlock, and pull SFP transceiver out of the slot.