Belden HIRSCHMANN IT MAMMUTHUS MTM8000 Series, Руководство пользователя

Страница: 35 / 65

35
Install MAMMUTHUS switch
Issued in December, 2020
1.6 Display unit
After the setting of the power voltage, the software will automatically start
and be initialized.
Then the device will start the self-check. During this
course, the LED indicator will be ON.
1.6.1 Device status
These LEDs provide the condition information influencing the operation of
the whole device.
Category of the
indicator Name of
the
indicator Color of
indicator Status
System status
indicator
SYS Green
Fast flashing (5Hz flashing frequency): indicates that
the hardware starts working since the power is
supplied
Slow flashing (0.5Hz flashing frequency): indicates that
the system is in normal operation
Normally ON/OFF: indicates that the system is in
abnormal operation
Power indicator PWR Green
Normally ON: indicates that all power modules in place
are in normal operation
OFF: indicates that the power modules in place are in
abnormal status
Fan indicator FAN Green
Normally ON: indicates that all fan modules on the
device are in normal operation
OFF: indicates that at least one (1) fan module on the
device is in abnormal status
STACK indicator STACK Green
Flash: indicates that the stacking function is enabled,
and this is the main device for the stacking system
Normally ON: indicates that the stacking function is
enabled, and this is not the main device for the
stacking system
Normally OFF: indicates that the stacking function is
not enabled
ID indicator ID Blue
Fast flashing (5Hz flashing frequency): for the field
operation, and remote control of the ON and OFF
status of ID LED by the operation and maintenance
personnel
OFF: ID LED is not enabled, default status