- 19 -
5.2 OM Setup
Since the working conditions of the crane are different, the LMI must be set up
to represent the actual configuration of the crane. To do that, the LMI must be
configured into a reprentative Operating Mode (OM) code. Before operating the
crane, find out the matched OM code according to the crane type and the
actual configuration, then enter the appropriate information into the LMI for: A)
outrigger configuration, B) parts of line of the hookblock being used and C)
boom configuration.
Correctly setting the OM guarantees the proper function of the system and
the crane. Only operators who are thoroughly familiar with the crane and the
operation of the system are qualified for the setting the OM codes. Improperly
setting the OM code in the LMI will result in false readings being displayed,
which can lead to a serious accident occuring.
F1: Select outrigger / tire
configuration
F2: Select static load lifting or creep
on tires
F3: Confirm OM code (After
confirmation Current OM will
change to Set OM)
F4: Reset the OM code to zero
F5: Back to the main display
Push N (F4 button) to reset the OM code. Push Y (F3 button) once the proper
configuration has been selected. See following page for outrigger / tire
configuration & static load lifting or creep on tires setup. Refer to section 10 for
WARNING
OM setup interface
