Belden HIRSCHMANN EAGLE40, Руководство пользователя

Страница: 34 / 52

34
Installation EAGLE40
Release 02 08/2020
2.8 Making basic settings
Note: 2 or more devices configured with the same IP address can cause
unpredictable operation of your network.
Install and maintain a process that assigns a unique IP address to every
device in the network.
The IP parameters must be entered when the device is installed for the first
time. The device provides the following options for configuring IP addresses:

Entry via V.24 connection
 Entry via the HiDiscovery protocol in the applications HiDiscovery or
Industrial HiVision
 AutoConfiguration Adapter
Further information on the basic settings of the device can be found in the
user manual.

Default settings for EAGLE40-03

V.24 data rate: 115200 Baud

Ethernet ports: link status is not evaluated (signal contact)

Optical ports: Full duplex
TP ports: Autonegotiation

Default settings for EAGLE40-07

DB9 port data rate: 115200 Baud

Ethernet ports: link status is not evaluated (signal contact)
 Optical ports: Full duplex
TP ports: Autonegotiation
2.8.1 First Login (Password)
Applies from software version HiSecOS 3.4:

To help prevent undesired access to the device, it is imperative that you
change the default password during initial setup.
Perform the following steps:

Open the Graphical User Interface, the Command Line Interface, or
HiView the first time you log on to the device.

Log on to the device with the default password “private”. The device
prompts you to type in a new password.

Type in your new password.
To help increase security, choose a password that contains at least 8
characters which includes upper-case characters, lower-case characters,
numerical digits, and special characters.