UM Configuration BAT-C2
121
Release 01.0.00 04/2019
7: Administration
Administrative features for the BAT-C2 are organized beneath the Administration tab in the Web
Manager user interface. This chapter describes the following administrative settings:
Actions
Configure actions to be taken either continuously or when an alarm is turned on or off. Use Delay
to defer alarm processing. Alarm actions will not be executed if the cause is corrected within this
time.
contains the configuration options for all alarms and reports.
Action Settings
Description
Delay
Enter the
Delay
time in seconds to defer alarm processing. Alarm actions will not be
executed if the cause is corrected within this time.Default is 5 seconds.
SNMP Trap
Use SNMP Trap to send SNMP trap to configured trap destinations. First click the
+
symbol to the right of
SNMP Trap
to expand action settings.
SNMP Trap
State
can be
Enabled
or
Disabled
. The contents of
Alarm Message
are included when an alarm SNMP trap is sent. If the alarm stays on longer than the
Reminder Interval
, another alarm SNMP Trap is sent. The contents of
Normal
Message
are included when a normal SNMP trap is sent. If the alarm stays off longer
than the Reminder Interval, another normal SNMP Trap is sent.
Table 7-1 Action Settings