7: Administration
UM Configuration BAT-C2
139
Release 01.0.00 04/2019
Notes:
Ensure that the certificate is formatted properly with a valid open and close tag.
Ensure that the Private Key is associated to the selected certificate and that it is
formatted properly with a valid open and close tag.
If the New Certificate field is set to
None
, the certificate is not supported.
5. Click
Submit
.
CSR (Certificate Signing Request)
The BAT-C2 uses the Secure Socket Layer (SSL) protocol for any encrypted network traffic
between itself and a connected client. During the connection establishment the BAT-C2 has to
expose its identity to a client using a cryptographic certificate. Upon leaving the factory this
certificate and the underlying secret key is the same for all BAT-C2s and will not match the
network configuration where it is installed. The certificate’s underlying secret key is also used for
securing the SSL handshake.It is possible to generate and install a new base64 encoded x.509
certificate that is unique for a particular BAT-C2. The BAT-C2 is able to generate a new
cryptographic key and the associated Certificate Signing Request (CSR) that needs to be certified
by a certification authority (CA).
To create and install an SSL certificate, perform the following steps.
1. On the
Administration
page, click
SSL > CSR (Certificate Signing Request)
. The
Certificate Signing Request page displays.
2. Modify the following fields:
3. Click
Submit
to initiate the Certificate Signing Request generation. After a few moments, the
CSR file created will appear.
4. Click the CSR file to download it if desired.
Syslog
The system log (Syslog) provides information that shows the current configuration and statistics of
the Syslog. You can configure the Syslog host and set the severity level for events to log.
Field
Description
Country (2 Letter code)
Enter the two-letter ISO code (e.g., US for the United States) for the country
where the organization is located.
State/Province
Enter the state or province where the organization is located.
Locality (City)
Enter the city where the organization is located.
Organization
Enter the organization name to which the BAT-C2 belongs.
Organization Unit
Enter the department within the organization to which the BAT-C2 belongs.
Common Name
Enter the network name of the BAT-C2 once it is installed in the user’s network
(usually the fully qualified domain name). It is identical to the name that is used to
access the BAT-C2 with a web browser without the prefix http://. In case the
name given here and the actual network name differ, the browser will pop up a
security warning when the BAT-C2 is accessed using HTTPS.
Key length
Select the key length:
2048
or
4096
.
Table 7-25 SSL CSR (Certificate Signing Request)