Belden grass valley KALEIDO-MX 4K, Руководство по описанию оборудования и инструкция по установке, Страница: 22 / 52

22
Installation
Signalling
Signalling
This section describes the connectors found on the Kaleido-MX 4K (1RU) models’ rear
panels. For information on setting up your system for initial deployment, please consult the
Kaleido-MX 4K (1RU) Quick Start Guide that shipped with your system.
Output Modules
Output module connectors on Kaleido-MX 4K 16 × 1
The following table lists the function of each connector associated with the output heads.
Connector label Connector type Function
SDI OUT A1 DIN 1.0/2.3 Serial digital HD output signal from Output A, Head 1.
Top-left quadrant of quad link (square division) 4K UHD
output (with embedded audio).
SDI OUT A2 DIN 1.0/2.3 Serial digital HD output signal from Output A, Head 2.
Bottom-left quadrant of quad link (square division) 4K
UHD output (with embedded audio).
SDI OUT B1 DIN 1.0/2.3 Serial digital HD output signal from Output B, Head 1.
Top-right quadrant of quad link (square division) 4K
UHD output (with embedded audio).
SDI OUT B2 DIN 1.0/2.3 Serial digital HD output signal from Output B, Head 2.
Bottom-right quadrant of quad link (square division) 4K
UHD output (with embedded audio).
MV OUT A1,
MV OUT A2,
MV OUT B1,
MV OUT B2 HDMI Not supported for 4K UHD monitoring. A seamless 4K UHD
output is only supported at the SDI OUT connectors. The
quad-link SDI to HDMI converter that ships with each
multiviewer provides one progressive scan HDMI 2.0
output.
SFP A1 1, SFP A1 2,
SFP A2 1, SFP A2 2,
SFP B1 1, SFP B1 2,
SFP B2 1, SFP B2 2 — Optional ports. Not yet supported.
FLEXBRIDGE IN A1,
FLEXBRIDGE IN A2,
FLEXBRIDGE IN B1,
FLEXBRIDGE IN B2 DIN 1.0/2.3 Reserved for future expansion