Belden Grass Valley KALEIDO-IP X110, Инструкция по установке и обслуживанию

Страница: 76 / 110

76
System Configuration
Testing the Monitor Wall Operation
If your system was configured prior to shipment, then a layout will appear on all
displays. Otherwise, a gray screen will appear with the following message in the
middle:
“No layout has been assigned to this room. Please load a layout.”
Testing the Monitor Wall Operation
If your system was configured prior to shipment, then a layout appears on all displays.
Otherwise, a gray screen will appear with the following message in the middle:
No layout
has been assigned to this room. Please load a layout.
To load a layout on the monitor wall
• If you have configured a Kaleido-RCP2 (see System Setup , on page 67), press any of the
LAYOUT PRESETS buttons to load a predefined layout on the monitor wall.
• Alternatively, connect a mouse directly to one of the Kaleido-IP frame’s USB ports. See
Troubleshooting with the Kaleido-IP frame’s USB ports , on page 102 for more
information about this.
a Right-click anywhere on the monitor wall, point to Monitor Wall (if you clicked a
monitor), and then click Load layout on the shortcut menu.
A layout browser appears on the displays associated with the current room.
b Select the layout you want to load from the list of available layouts for this room,
and then click OK .
The selected layout appears on the room displays.
Note:
To access other layouts, press the LOAD button. To assign a layout to
a preset button, press and hold the button for more than six seconds while
the desired layout is showing on the monitor wall.
Note:
To access other layouts, press the LOAD button. To assign a layout to
a preset button, press and hold the button for more than six seconds while
the desired layout is showing on the monitor wall.