17
K-FRAME
Release Notes
Calibrate the Lever Arm and Joystick
See the Maintenance section of the
K-Frame Installation & Service Manual
.
K-Frame System Default IP Addresses
K-Frame systems are shipped with default IP addresses. These default addresses can be
used if the K-Frame system is operating on a dedicated network with no other devices
present. Note that these addresses can be changed during installation, and so your system
may not be using these defaults.
CAUTION:
Before installing an older version of the Menu Panel
application, you must first uninstall the newer, currently
installed Menu Panel version, either using that newer version’s
K-Frame Deploy Tool or Windows Add/Remove Programs.
Note:
All the components of a switcher system must run the same
software version. If you want to return to an earlier version of software,
you should back-down the software on the Video Processor Frame, all
Control Panels, and all Menu Panel applications used with that switcher
system.
K-Frame System Default IP Addresses
Device
IP Address
Touch Screen Menu Panel 1
192.168.0.175
Touch Screen Menu Panel 2
192.168.0.176
Control Panel Surface 1B
192.168.0.177
Control Panel Surface 2A
192.168.0.178
Control Panel Surface 2B
192.168.0.179
ClipStore Server
192.168.0.180
32-Crosspoint Remote Aux Panels
V1.6.5 and higher software:
(hard reset with the front panel
buttons)
IP Address: 192.168.1.2
Frame IP: 192.168.1.1
Gateway IP: 192.168.1.1
Subnet Mask 255.255.255.0
Note:
32-Crosspoint Remote Aux Panel default
settings must be changed to operate with a
Karrera system whose other components are
configured with their default IP addresses.
All Subnet Masks)
255.255.255.0
All Gateways (except V1.6.5 software
Remote Aux panel)
192.168.0.1
