Belden GRASS VALLEY DENSITE 3+ FR4, Руководство пользователя

Страница: 30 / 59

18
Configuration
Identification
iControl - click the Info button
The CPU-ETH3 controller is accessible on a
network, and must be identifiable in order to
function in the iControl environment. The
identification data is entered in the iControl
INFO control panel. This panel also shows
other data that is not user-adjustable.
You can enter the following information by
clicking and typing in the data box:
Label : allows the user to define the label that
identifies this device when it appears in iCon-
trol applications
Short Label: allows the user to define the
short-form label for iControl (8 characters)
Source ID: type a descriptive name for this
CPU-ETH3 controller
Comments: type any desired text
The remaining data boxes show manufac-
turing information about this card.
Three buttons in the panel give access to other information:
Details: Reports the Firmware version, service version, and panel version for this card
Advanced: Shows the LongID for this card. The LongID is the address of this CPU-ETH3
controller in the iControl network.
Remote System Administration: . Opens the Joining Locators
data box, which lists remote lookup services to which this
CPU-ETH3 is registered.
Add: Force the iControl service for this CPU-ETH3 to regis-
ter itself on a user-specified Jini lookup service, using the
following syntax in the data box:
jini://<ip_address>
where <ip_address> is the ip address of the server running the lookup service, e.g.: