Development Kit for EES20 and EES25
19
Release 1.0 03/2012
When HiDiscovery is started, it automatically searches the network in a
VLAN Broadcast domain for devices that support the HiDiscovery
protocol. On delivery, the EES HiDiscovery protocol is “enabled” and
access is set to “read-write” which allows you to change device IP-
Address.
Figure 3-1: HiDiscovery
Note: If the HiDiscovery application does not find any devises, check to
ensure that your firewalls are disabled.
The HiDiscovery protocol allows you, from your PC via an Ethernet
connection, to allocate an IP address to the EES device based on its
MAC address as seen below.
Figure 3-2: Setting IP-Parameters
