belavi PERGOLA, Руководство пользователя, Страница: 9 / 25

16 17
E
2
E
2
E
2
E
2
E
2
E
1
E
1
E 1
E
1 E
1
DD
E
1
& E
2
STEP 7:
Place all five assembled Canopy Supports (E1 & E2) across the frame,
where they are resting on top of Crossbeams (C & D). For a consistent
look, place Canopy Supports (E1 & E2) on top so that their placement
matches what is illustrated here; i.e. all E2’s is on one side of pergola,
while all E1’s is on the opposite side. Insert one M6x65mm Bolt (DD)
through each end of assembled Canopy Supports (E1 & E2), and into
the tops of Crossbeams (C & D), see Fig. 14. Tighten all bolts left loose
since Step 5 of these instructions.
Assembly Instructions
DD
(10) M6X65 mm Bolts
*Do not tighten bolts down completely during this portion of assembly.
G
1
G
2
G
2
G
1
Q
Q
STEP 8:
Place Canopy (Q) over Canopy Supports (E1 & E2). Please note that the
canopy tags should be facing inward once this step is complete.
Insert Canopy Weight Bar (G1) through sleeves found at either end of
Canopy (Q), see Fig. 15. Insert Canopy Weight Bar (G2) through opposite
side of sleeves found at either end of Canopy (Q), see Fig. 16. Insert end
of Canopy Weight Bar (G2) into the open end of Canopy Weight Bar (G1),
so that they lock in place, see Fig. 17. Please note that the latches to
these two parts should be facing outward.
Assembly Instructions
*Parts G1 and G2 are not stiff when connected, they are meant
be flexible.
Fig. 14
Fig. 17
Fig. 16
Fig. 15
For
Reference
Only