belavi PERGOLA, Руководство пользователя, Страница: 6 / 25

10 11
Assembly Instructions
STEP 3:
Insert Connector (H) into the open end of Canopy Support (E1), see
Fig. 5. Insert one M6x15mm Bolt (BB) through the top eyelet of Canopy
Support (E1), and into the bolt-threading found at the top of Connector
(H), see Fig. 5. Insert open end of Canopy Support (E2) over opposite
end of Connector (H), and use one M6x15mm Bolt (BB) to secure these
parts together, see Fig. 5.
Place Crossbeam Connector (N) over where Canopy Support (E1 & E2)
meet as illustrated here, see Fig. 6.
Insert two M6x15mm Bolts (BB) through eyelets on both ends of
Crossbeam Connector (N), and into the bolt-threading found on the
sides of Canopy Support (E1 & E2) where these parts meet, see Fig.
7. Make sure all bolts are securely tightened. Follow these steps to
connect remaining E1’s and E2’s with remaining H’s and N’s.
5X
E
1
H
BB
BB
E
2
E
1
E
2
E
1
E
2
N
Assembly Instructions
STEP 4:
Slide Covers (K) onto Poles (A1 & A2) from the bottom of these parts, see
Fig. 8. Insert Foot (J) into the bottom openings of Poles (A1 & A2), and
secure these parts together using two M6x15mm Bolts (BB), see Fig. 8
& 9B. Slide Cover (K) over Foot (J) when assembly is completed. Follow
these steps to connect remaining A1 and A2 with remaining J’s and K’s.
Please take note of the bolt-threading inserts found near the
top and bottom of both Poles (A1 & A2). Two of the inserts are by
one another near the top (Fig. 9A) and one near the bottom on
one side of each pole (Fig. 9B). On the adjacent side of each pole,
one of the inserts will be found near the top only, see Fig. 9A. It is
important to be aware of the placement of these inserts to avoid
error during construction.
4X
J
A
1
& A
2
K
Fig. 9B
BB
BB
Fig. 9A
Fig. 8
Bolt-threading Inserts
Fig. 7
Fig. 6
Fig. 5
BB
(8) M6X15 mm Bolts
BB
(30) M6X15 mm Bolts
For
Reference
Only