Belanger Top Wheel Mix & Match, Руководство пользователя

Страница: 51 / 80

TOP WHEEL
Mix and Match
1MANUL749
Belanger, Inc. * 1001 Doheny Ct. * Northville, MI 48167 * Ph (248) 349-7010 * Fax (248) 380-9681
47
Startup
Verify Rotation and Speed
There are numerous ways to check rotation speed of a wheel. One way that we recommend is to tie
a white thin object, such as a tie-wrap, around the hub. Power up the wheel and count the rotations
of the tie-wrap.
Optimal Rotation Speeds
Hydraulic Drive with Neo- Tex™ or Whisper Wheel 112-120 RPM Adjust using the hydraulic flow control
Hydraulic Drive with Brush 95-100 RPM Adjust using the hydraulic flow control
Electric Drive with Neo- Tex™ or Whisper Wheel 116 RPM Verify proper gearbox
Electric Drive with Brush 116 RPM Verify proper gearbox
Verify Wheel Penetration
Be sure the wheel is spinning at the proper speed and in the proper direction.
Always check wheel penetration while the wheel is spinning. The initial wheel weight can be checked
using the
supplied “fish-scale”. Hook the scale to the passenger-side arm and raise arm
perpendicular to the legs. Power up the wheel to verify the actual weight of penetration the wheel is
applying to the vehicle surface.
The wheel weight can be adjusted four ways:
•
Sliding the internal arm weights shown below
•
Removing one of the sliding weights from the passenger side arm
•
Adding weights; which will decrease wheel weight thus creating less wheel penetration
•
Removing weights; which will increase wheel weight creating more wheel penetration
•
WARNING – BE AWARE OF THE AREA SURROUNDING A ROTATING PIECE OF
EQUIPMENT. OBJECTS MAY BECOME TANGLED WITH EQUIPMENT AND
COULD RESULT IN SERIOUS INJURY OR DEATH.
Direction of travel
Notice the scale is
hooked to passenger
side arm while arms
are perpendicular to
legs.
Note:
Add, remove or adjust counterweights as needed to stay within 18-25 lbs. (8.2 – 11.3 kg) of
penetration. Too much vehicle penetration can cause damage to vehicles or the wash equipment.