22
/ SOLID PANEL INSTALLATION GUIDE
As this is generally the first time most people have applied this type of finish, it is highly recommended that
you follow the procedure below exactly on a small test panel first before applying to your finished wall.
Base Coat – We use and recommend Dulux Acra Sand texture paint. Acra Sand is available from Dulux trade
stores only. Only a single base coat of this is required, if over coated with Dulux Weather shield
(see top coat step below).
If a different brand of sand based finish is selected, (than specified above) please ensure that it is
self-priming onto fibre cement/masonry surfaces.
If it isn’t then a base primer such as Dulux Acraprime will also be required.
NOTE: This base Acra Sand coat can (in most cases) be tinted to the colour of your final topcoat at the time
of purchase.
NOTE: This product should not be used as a top coat as it is not ‘UV’ stabilized.
Dulux product spec: http://www.duspec.co.nz/duspec/file/NZDA0990.pdf
Application Method
Top Coat – We use and recommend Dulux Weather Shield or a similar premium brand of exterior grade paint.
The metal surfaces to be painted must be clean, dry and free of contaminants. Lightly scuff/rub down all
Metal and Primed components with a Scotch Bright pad prior to the application of paint. Scotch Bright pads
are available from most paint stores.
Prepare the surface by ensuring that the Fibre Cement Panels are clean, dry and free of contaminants. This
can be achieved by means of a brush down with a stiff brush or rubbing very lightly with a ‘Scotch Brite’ pad.
Содержание Classic
Страница 23: ......
