BEL STEWART 298007X-01 CRIMP TOOL Complete with dies
From MN290008 Rev A3
3.
Unblocking the tool
IMPORTANT: Apply working force on the tool handles while unblocking. It will prevent hurting yourself and
possible damages to the tool.
Figure 7
Using small screwdriver or similar tool, push the ratchet relief (A), located inside the moving handle, ( Fig. 7.) in
the direction as shown to unblock the tool. Remove obstruction before continuing with the work.
Use only connectors of appropriate type with this tool. Crimping connectors of unsuitable type may result in
unsatisfactory crimped connections and may in damage to the tool.
4.
Tool regulation procedure
After prolonged work period, tool crimping performance can change slightly due to final self-adjustment of the
tools’ components. This handtool is equipped with eccentric axle which allows periodical adjustment of
crimping force and tool recalibration to maintain correct crimp performance.
Figure 8
1.
Loosen and remove allen head screw (A) using a 2.5mm allen wrench. (Fig.8.)
2.
Using a screw driver turn eccentric axle (B) and toothed adjustment wheel (C) into new position.
dir for enlarging crimping force and reducing gap between crimping dies direction – for reducing
crimping force and enlarging gap between crimping dies
3.
Reinstall allen head screw (A) and tighten it.
