48
7. Repeat the operation for a maximum number of 99 ingredients.
Note: During the acquisition of the ingredient, the display of Err10 indicates a negative weight value.
Check not to have made a mistake with the ingredient loading and zeroing procedure.
8. To end, print the value of the individual components and the total value, and press and
keep pressed the
button until the beeping stops. The display will show the
following screen:
9. To exit from the screen and carry out a new formulation, press the
ON/OFF
button once.
To exit from the program and return to the weighing screen, press the
ON/OFF
button two
consecutive times.
11.3.2 Formula saving
1. Select the formulation program as described in paragraph 10.
The following screen will be shown on the display:
2. Select the number of the formula to save or modify using the
CAL
and
MENU
buttons to
increase and decrease the value, after the word ‘Formula’. Then press and keep pressed
the
button until the beeping stops to confirm the selection and enter the ‘setup
formula’ menu.
3. Enter the name of the formula (it can be a series of numbers or letters, max 20 characters)
using the
MENU
or
CAL
buttons to scroll all of the available characters, and the
TARE
button to pass to the next character. To select the uppercase or lowercase character,
press and hold the
MENU
button until the beeping stops.
Formulation
Manual
01-06-10 13:15:24
Formula:00
Form. setup
_
01-06-10 13:15:24
Formula:01
Formulation
01-06-10 13:15:24
END
TOT: 20.0000 g
P: 0.0000g
