40
If the pieces to be counted have a weight that is too little with respect to the balance’s
resolution, an error message will be displayed.
In this case it will be necessary to turn to a balance with greater resolution.
If the weight of the samples is acceptable but not sufficient, the following message will be
displayed: Add enough pieces so as to approximately double the quantity loaded on the plate,
then press the
button.
If the number of pieces is still insufficient, the message indicated above will be displayed
again. Double the quantity of pieces loaded again.
Once a sufficient number of pieces has been reached, their number will be displayed and it
will be possible to proceed with the counting, loading the pieces to be counted on the plate.
4.
To exit from piece counting mode, press the
ON/OFF
button and the balance will return to
the normal weighing conditions.
11.1.1 Manual insertion of the average unit weight
This function allows the user to enter, when known, the average unit weight of the piece, thus
avoiding the sampling of the pieces.
1. Select the piece counting program as described in paragraph 10.
The following screen will be shown on the display:
Piece counting 01-06-10 13:15:24
P: 0.0158 g AUW: 0.0006 g
E premere ‘ Print’
Pieces: 24
Piece counting
Select the number of samples
01-06-10 13:15:24
10 Pieces
Piece counting 01-06-10 13:15:24
Add some pieces
E premere ‘ Print’
and press‘ Print ‘
E premere ‘ Print’
