bel Digital Audio 2120B, Руководство пользователя

Страница: 7 / 34

BEL DIGITAL AUDIO Bel2120B

2004 BEL Digital Audio Ltd.
7
contained in outline boxes. These values can be adjusted but the gain variation will
not take effect until the FAD switch is activated.
MAT
This switch is only functional in the matrix mode and can be used to override
any redirection imposed on the input audio. If the character M is not shown in inverse
video on the right hand side of the LCD display all inputs are passed to their
appropriate output. i.e. in 1 to out 1, in 2 to out 2 etc. The discs connecting input lines
to output lines will be replaced by outline squares. The position of these connections
can be adjusted but the actual input/output assignment will not be made until the
MAT switch is activated.
BYP
This switch will activate an electronic bypass and is a combination of FAD
and MAT. No gain adjustment or redirection of the inputs occurs when the character
B is shown in inverse video on the right hand side of the LCD display.
LOCK
When the unit is ‘locked’ all the front panel keys, except LOCK, are
inoperative. To release the keys press and hold the LOCK key for a period in excess
of five seconds. A momentary press of the LOCK key will again place the unit in the
lock mode. The locked mode is indicated by the character L shown in inverse video
on the right hand side of the LCD display.
Monitor level and output jack
The headphone monitor output is available from this 6 mm stereo Jack. The
outputs to this jack can be selected in the setup menus; the audio level is set by the
small knurled control.