43 / EN
Washing Machine / User’s Manual
Problem
Cause
Solution
Too much foam forms inside
the product. (**)
Improper detergents for the washing machine
is used.
• Use detergents appropriate for the
washing machine.
Excessive amount of detergent is used.
• Use only sufficient amount of
detergent.
Detergent was stored under improper conditions.
• Store detergent in a closed and dry
location. Do not store in excessively
hot places.
Some meshed laundry such as tulle may foam too
much because of their texture.
• Use smaller amounts of detergent for
this type of item.
Detergent was put in the wrong compartment.
• Put the detergent in the correct
compartment.
Softener is being taken early by the product.
• There may be problem in the valves
or in the detergent drawer. Call the
Authorised Service Agent.
Foam is overflowing from
the detergent drawer.
Too much detergent is used.
• Mix 1 tablespoonful softener and ½
l water and pour into the main wash
compartment of the detergent drawer.
• Put detergent into the product
suitable for the programmes and
maximum loads indicated in the
“Programme and consumption table”.
When you use additional chemicals
(stain removers, bleaches and etc.),
reduce the amount of detergent.
Laundry remains wet at the
end of the programme. (*)
Excessive foam has occurred and automatic foam
absorption system has been activated due to too
much detergent usage.
• Use recommended amount of
detergent.
(*) The product does not switch to spinning step when the laundry is not evenly distributed in the drum to prevent
any damage to the product and to its surrounding environment. Laundry should be rearranged and re-spun.
(**) Regular drum cleaning is not applied. Clean the drum regularly. See 4.7.2
A
WARNING:
If you cannot eliminate the problem although you follow the instructions in this
section, consult your dealer or the Authorised Service Agent. Never try to repair a nonfunctional
product yourself.
