Beko WTV 9745 X0A, Руководство пользователя, Страница: 81 / 96

81 / EN
Washing Machine / User’s Manual
4.3.13 Cancelling the programme
The programme is cancelled when the machine is turned off and on again. Press and hold
On/Off
button for 3 seconds. After the countdown as "3-2-1" on the display is over, the
machine turns off.
C
If you press On/Off button when the Child Lock is enabled, the programme will not be
cancelled. You should cancel the Child Lock first.
If you want to open the loading door after you have cancelled the programme but it is not
possible to open the loading door since the water level in the machine is above the loading
door baseline, then turn the Programme Selection knob to Pump+Spin programme and drain
the water in the machine.
4.3.14 End of programme
End symbol appears on the display when the programme is completed.
If you do not press any button for 10 minutes, the machine will switch to OFF mode.
Display and all indicators are turned off.
Completed programme steps will be displayed if you press On/Off button.
4.3.15 Adjusting the VOLUME for warnings, notifications and keys
Low volume and high volume
Press and hold 1st and 2nd auxiliary function buttons for 3 seconds to adjust the volume
level. After the countdown as "3-2-1" on the display is over, the volume level symbol will
appear and the new volume level will be displayed.
4.3.16 HomeWhiz Function
HomeWhiz allows you to use your smart device to check your washing machine and get
information about its status. With HomeWhiz application you can use your smart device to
perform various procedures that can also be performed on the machine. Plus, you can use
some features only with the HomeWhiz function.
You must download the HomeWhiz application from the app store of your smart device to
use the WLAN feature of your machine.
Make sure that your smart device is connected to internet to install the app.
If you are using the app for the first time, please follow the on-screen instructions to
complete your user account registration. Once the registration procedure is complete, you
can use all products with the HomeWhiz feature in your house on this account.
During setup, both the washing machine and the smart device must be connected to the
same network. After the setup procedure is complete, your smart device and washing
machine do not need to be connected to the same network. You can use product as long as
your smart device is connected to internet.
You can touch "Add/Remove Product" on the "Products" page to see the products paired
with your account. You can perform user pairing procedures of these products on this page.
Once the application is installed, the HomeWhiz function allows your washing machine to
send you push notifications through your smart device.
Your washing machine will send you a notification through the HomeWhiz
application in the following cases:
• When the programme is over,
• When the door of the washing machine is opened,
• When No water warning is displayed,