Owner’s Guide & Installation Instructions
33
/ English
Selecting a Program and Operating Your Washer
Starting the Program
1. Press Start/Pause/Cancel button to start the program.
2. The start symbol which indicates that the program has started will light up.
3. The door locks and the door locked symbol will light up.
4. The Symbol of the relevant step (prewash, main wash, rinse, softener and spin) that the program
has started from will light up.
Progress of program
The progress of a running cycle is shown through a number of symbols on the screen.
•
At the beginning of each program step, the relevant symbol in the series of symbols will light up
and thus, at the end of the program, all symbols will remain lit up. The symbol that lights up at the
far right of the series of symbols indicates the step that is being carried out.
Soak
When “Soak” auxiliary function is selected, soak symbol will light up to indicate the beginning of this
wash step.
Main wash
Main wash symbol will light up to indicate that the main wash cycle has started.
Rinse
Rinse symbol lights up at the beginning of the rinse step.
Softener
Softener symbol lights up at the beginning of softener step.
Spin
Spin symbol will light up at the beginning of the final spin, during “Drain&Spin” special programs.
•
If the washer is not spinning, the program may be in rinse hold mode or the automatic spin
correction system has been activated due to an excessive unbalanced distribution of laundry in the
washer.
Changing the selections after the program has started
The selected spin speed and program temperature fade out. An empty frame appears.
When the “Program selection” button is brought to the appropriate position, rpm and temperature data
reappear.
Switching the washer to standby mode
The washer is switched to standby mode by pressing “Start/Pause/Cancel” button momentarily. The
Standby symbol which indicates the washer is in standby mode lights up and the start symbol that
shows the program has started and is still continuing fades out.
Selecting or canceling an auxiliary function in pause mode
Auxiliary functions can be cancelled or selected in accordance with the step the program is at.
Adding/removing laundry in pause mode
The door can be opened if the water level is suitable. The door locked symbol will light up until the
door is suitable for opening. This symbol will fade out as soon as the door is allowed to open. Laundry
may be added / taken out by opening the door.
Содержание WTE7604XLW0
Страница 55: ...Owner s Guide Installation Instructions 55 English ...
Страница 56: ...www beko com ...