Beko WTE7604XLW0, Руководство пользователя

Страница: 20 / 56

20 / English Front-Loading Automatic Washer
Operating Instructions
• Remove any non-washable items and accessories from laundry before washing.
• Empty pockets, remove all foreign objects (e.g. coins, pens, paper clips). If possible: Turn pockets
inside out and brush.
• Place small items of laundry (e.g. tights) in a cloth bag, pillow case or something similar. This can
also help you to avoid searching for lost socks.
• Handle curtains special care. Remove non-stainless curtain runners and lead tape. Place runners
that can’t be removed in a cloth bag, pillow case or something similar.
• Heavy stains should be pretreated with soapy water appropriately before washing (Do not rub or
scratch the stained area). If in doubt, check with a chemist or dry-cleaner.
• Use only dyes/discoloring and anti-scaling agents suitable for machine wash. Make sure to follow
the instructions on the package.
A
WARNING
¾ Wash jeans, delicates, pants and sweat-shirts inside-out.
Loading the washer
Maximum load capacity depends on the fabric type of laundry, soiling amount of laundry and program
cycle you wish to use.
C
CAUTION
¾
Do not exceed the maximum load capacity of the selected program cycle.
Washing results are adversely affected by an overloaded drum. Overloading
may also cause wrinkling and abrasion on clothes.
Make sure power button is off before loading the washer. To load the washer,
• Pull the door handle.
• Place laundry items loosely in the drum.
• Mix small and large items for an even load distribution. Large items should be loaded first. Large
items should not be more than half of the total wash load.
• If you put a wash bag or net which is filled with small items in the drum, put an additional wash
bag to prevent load unbalance. Both wash bags should have the same amount of items to provide
an even load distribution.
• Before washing a single or a few items such as a pillow, a teddy bear, a single or a pair of shirts,
sweat shirts etc, put some additional items in the drum for better load distribution and spinning.
• Make sure that there is no clothing obstructing the door or caught between the door and rubber
seal.
• Push the loading door firmly shut until you hear it lock into space (especially if you load the washer
with full load or big items).
• In case the door is not locked, “door” expression will appeare on the screen. In that case, door
should be opened and closed again firmly.
• If the door is not closed completely, the machine will not start. This is a safety precaution. The front
door is locked until end of the washing program and it can not be opened untill the door icon on
LCD is off following the end of the program.
• Unload the washed items just after the program cycle has finished. Delay of unloading may cause
wrinkling and unwanted odor on laundry.
• Check to see any small metal items such as pins, coins etc left in rubber seal while unloading the
washer. Any residual metal items may cause rusting on the rubber seal.
• If there is any water left in rubber seal, remove with a soft cloth.