Beko WTE7604XLW0 страница 10 Скачать руководство пользователя

Страница: 10 / 56

/ English

Front-Loading Automatic Washer

Read this first !

This washer can be individually installed in free-standing and built-in installations. You can also install

your washer with your dryer as a free-standing or built-in pair. Before you install your appliance, read

the following instructions completely and carefully:

• Save these instructions for future reference.

• This appliance must be properly installed and grounded by qualified and skilled technicians in

accordance with all local codes and ordinances and the latest edition of the National Electrical

Code, ANSI/NFPA 70.

• Proper installation of this appliance is the responsibility of the owner and failure due to improper

installation is not covered by the warranty.

The Right Location of Installation

You can install your washer in a basement, closet or in a laundry room if the location has proper

drainage, plumbing and power supply system. Always follow these instructions for installation:

• Do not install or store this appliance where it will be exposed to the weather, rain, damp places,

water and direct sunlight. The ambient temperature must be higher than 60°F (15.6°C) for proper

operation. Installation location must have the proper ventilation.

• Do not store and use any flammable and combustible substances such as lint, paper, curtains,

gasoline, coal and liquid or vapor chemicals near the appliance.

• Install and operate the washer on a strong solid concrete floor to prevent vibration, noise or

movement in case of load unbalance. The floor must have sufficient load carrying capacity and the

washer must be leveled properly before the operation.

• It is not recommended to install and operate the washer on a wooden floor or soft floor. If you

have to install your washer on a wooden or frame construction floor, the floor must be reinforced

properly and the washer must be located in the corner of the room if possible.

• Never place your washer on a carpet. This prevents air circulation. The electrical components of the

machine may overheat and cause damage.

• Do not stand appliance on the power cable.

• Do not install and operate your washer in ambient temperatures lower than 32˚F (0˚C). Controls

may stop working properly in such condition.

• If there is danger of frost, drain all remaining water in pump and hoses since it may freeze and

cause damage by bursting them (see “Cleaning the drain pump

filter”).

Installation Clearances

CAUTION

The installation location must be large enough for the washer door to be fully

opened for loading.

The installation location must be large enough for ease of operation,

maintenance and service.

Ensure there is min 1/2” of clearance on each side of the washer to allow

slight side ways movement during washing and spin drying.

Installation Instructions

Содержание WTE7604XLW0

























































Результаты поиска

Содержание WTE7604XLW0

Отзывы:

Похожие инструкции для WTE7604XLW0

Бренды по названию

Популярные бренды

Beko WTE7604XLW0, Руководство пользователя

Результаты поиска

Содержание WTE7604XLW0

Отзывы:

Похожие инструкции для WTE7604XLW0

Бренды по названию

Популярные бренды