34 / EN
Washing Machine / User‘s Manual
Troubleshooting
Washing takes longer time than specified in the manual.(*)
• Water pressure is low. >>>
Machine waits until taking in adequate amount of water to prevent poor washing quality due
to the decreased amount of water. Therefore, the washing time extends.
• Voltage might be low. >>>
Washing time is prolonged to avoid poor washing results when the supply voltage is low.
• Input temperature of water might be low. >>>
Required time to heat up the water extends in cold seasons. Also,
washing time can be lengthened to avoid poor washing results.
• Number of rinses and/or amount of rinse water might have increased. >>>
Machine increases the amount of rinse
water when good rinsing is needed and adds an extra rinsing step if necessary.
• Excessive foam might have occurred and automatic foam absorption system might have been activated due to too
much detergent usage. >>>
Use recommended amount of detergent.
Programme time does not countdown. (On models with display)(*)
• Timer may stop during water intake. >>>
Timer indicator will not countdown until the machine takes in adequate
amount of water. The machine will wait until there is sufficient amount of water to avoid poor washing results due to lack of
water. Timer indicator will resume countdown after this.
• Timer may stop during heating step. >>>
Timer indicator will not countdown until the machine reaches the selected
temperature.
• Timer may stop during spinning step. >>>
Automatic unbalanced load detection system might be activated due to the
unbalanced distribution of the laundry in the drum.
Programme time does not countdown.(*)
• There might be an imbalance of laundry in the machine. >>>
Automatic unbalanced load detection system might be
activated due to the unbalanced distribution of the laundry in the drum.
Machine does not switch to spinning step.(*)
• There might be an imbalance of laundry in the machine. >>>
Automatic unbalanced load detection system might be
activated due to the unbalanced distribution of the laundry in the drum.
• The machine will not spin if water is not drained completely. >>>
Check the filter and the draining hose.
• Excessive foam might have occurred and automatic foam absorption system might have been activated due to too
much detergent usage. >>>
Use recommended amount of detergent.
Washing performance is poor: Laundry turns grey.(**)
• Insufficient amount of detergent was used over a long period of time. >>>
Use the recommended amount of
detergent appropriate for water hardness and the laundry.
• Washing was made at low temperatures for a long time over a long period of time. >>>
Select the proper
temperature for the laundry to be washed.
• Insufficient amount of detergent is used with hard waters. >>>
Using insufficient amount of detergent with hard
water causes the soil to stick on the cloth and this turns the cloth into grey in time. It is difficult to eliminate graying once it
happens. Use the recommended amount of detergent appropriate for water hardness and the laundry.
• Too much detergent is used. >>>
Use the recommended amount of detergent appropriate for water hardness and the
laundry.
