Beko WMB 60831 D Скачать руководство пользователя страница 27

Страница: 27 / 31

Cause

Explanation / Suggestion

Programme cannot be started or selected.
Machine may have switched to self

protection mode due to an infrastructure

problem (such as line voltage, water

pressure, etc.).

Bring your machine to factory settings by turning

the Programme selection knob. (see, Ending the

Programme through Cancelling)

Water in the machine.
There may be some water in your machine

when you receive it. This is from the quality

control process and is normal.

It is not harmful to your machine.

There is water coming from the bottom of the machine.

There might be problems with hoses or the

pump filter.

- Make sure that the seals of the water inlet hoses

are securely fitted.

- Tightly attach the drain hose to the tap.

- Make sure that the pump filter is completely

closed.

Machine does not fill with water
- Tap may be turned off.

- Water inlet hose might be bent.

- Water inlet filter might be clogged.

- The loading door may be ajar.

- Open the inlet water taps fully.

- Flatten the water intake hose.

- Clean the water intake filter.

- Close the loading door.

Machine does not discharge water.
- Water outlet hose might be clogged or

twisted.

- Pump filter may be clogged.

- Clean or flatten the hose.

- Clean the pump filter.

Machine vibrates or shakes.
- Machine feet might not be adjusted.

- Transportation safety bolts might have

not been removed.

- There may be a small amount of laundry

in the machine.

- The machine may be overloaded or the

clothes may be distributed unevenly.

- There machine might be touching a solid

surface.

- Adjust the machine feet.

- Remove the transportation safety bolts.

- Add more laundry to the machine.

- Reduce the amount of laundry in the machine or

balance the load by hand.

- Ensure that nothing touches the machine.

Machine stops shortly after the Programme starts.
Machine can stop temporarily due to low

voltage.

It will resume operating when the voltage is back to

the normal level.

The water being taken in is directly discharged.

Improper position of the drain hose.

Connect the water draining hose as described in the

operation manual.

No water can be seen in the machine during washing.
This is not a problem. The water level is

not visible from the outside of the machine.

Solution suggestions for problems

Содержание WMB 60831 D
































Результаты поиска

Содержание WMB 60831 D

Отзывы:

Похожие инструкции для WMB 60831 D

Бренды по названию

Популярные бренды

Beko WMB 60831 D, Руководство пользователя

Результаты поиска

Содержание WMB 60831 D

Отзывы:

Похожие инструкции для WMB 60831 D

Бренды по названию

Популярные бренды