EN
20
Changing the selections after
the program has started
Switching the machine to standby
mode
Press the “Start/Pause” button to switch
the machine to pause mode while a
program is running. The light of the step
which the machine is in starts flashing in
the program follow-up indicator to show
that the machine has been switched to
the pause mode. Also, when the door is
ready to be opened, "Door" light will also
illuminate continuously in addition to the
program step light. If necessary conditions
to open the door are not met, the "Door"
light will remain off.
Changing the speed and temperature
settings for auxiliary functions
Auxiliary functions can be cancelled
or selected, or the spin speed and
temperature settings can be changed in
accordance with the step the program is
in. If the change can not be made, relevant
light will flash for 3 times.
Adding/removing laundry in pause
mode
If the "Door" light flashes while the
machine is in pause mode, it means that
the conditions (low water level, etc.) to
open the door have been met and the
period of approx. 1 or 2 minutes to open
the door has started. “Door” lamp will
light up continuously when the door is
unlocked. Door can be opened to load or
unload the laundry after this moment. If
the front door cannot be opened because
of a safety reason after the machine has
been switched to the pause mode by
pressing the "Start/Pause" button, the
"Door" light will continue to remain off.
Nevertheless, the follow-up light of the
relevant program in which the machine
was taken to "Pause" mode will flash.
Door lock
The loading door can be opened once
the “Door” lamp stops flashing and starts
lighting up continuously.
Child-proof lock
Protect the appliance from being
tampered by children by means of the
child-proof lock. In this case, no change
can be made in the running program.
C
If the program selection knob is turned
when the child-proof lock is activated,
"Con" label will be displayed. In this
case, any change in temperature,
speed and auxiliary functions which
are already selected for the programs
is not allowed.
C
If the program selection knob is turned
to "On/Off" position and then another
program is selected while a program
is running, the previously running
program will resume operating.
The machine is switched to child-lock
by pressing the 1st and 2nd auxiliary
functions for 3 sec. While the lights on
the auxiliary function buttons 1 and 2
are flashing during 3-second press and
hold process, C03, C02 and C01 labels
will be displayed respectively. Then the
label "Con" will be displayed to show
that the child-proof lock is activated. The
same label will also appear on the screen
when any button is pressed or when the
program selection knob is turned while the
machine is in child-proof lock mode.
Furthermore, the lights on the auxiliary
function buttons 1 and 2 blink 3 times to
show how to exit Child-proof Lock mode.
To deactivate the childproof lock:
a) Press the auxiliary function buttons
1 and 2 for 3 sec. while any program
is running. While the lights on the
auxiliary function buttons 1 and 2 are
flashing during 3-second press and
hold process, C03, C02 and C01
labels will be displayed respectively.
Then, the "COF" label will be
displayed to show that the child-proof
lock mode has been deactivated.
b) In addition to the above method,
child-proof lock can also be
deactivated by turning the program
selection knob to "On/Off" position
and selecting another program when
