Beko RFNE312L33W, Руководство пользователя

Страница: 6 / 45

EN
5
•
Do not use steam or steamed clea-
ning materials for cleaning the ref-
rigerator and melting the ice insi-
de. Steam may contact the electrifi-
ed areas and cause short circuit or
electric shock!
•
Do not wash the product by spra-
ying or pouring water on it! Danger
of electric shock!
•
In case of malfunction, do not use
the product, as it may cause electric
shock. Contact the authorised servi-
ce before doing anything.
•
Plug the product into an earthed
socket. Earthing must be done by a
qualified electrician.
•
If the product has LED type lighting,
contact the authorised service for
replacing or in case of any problem.
•
Do not touch frozen food with wet
hands! It may adhere to your hands!
•
Do not place liquids in bottles and
cans into the freezer compartment.
They may explode.
•
Place liquids in upright position after
tightly closing the lid.
•
Do not spray flammable substances
near the product, as it may burn or
explode.
•
Do not keep flammable materials
and products with flammable gas
(sprays, etc.) in the refrigerator.
•
Do not place containers hol-
ding liquids on top of the product.
Splashing water on an electrified
part may cause electric shock and
risk of fire.
•
Exposing the product to rain, snow,
sunlight and wind will cause electri-
cal danger. When relocating the pro-
duct, do not pull by holding the door
handle. The handle may come off.
•
Take care to avoid trapping any part
of your hands or body in any of the
moving parts inside the product.
•
Do not step or lean on the door, dra-
wers and similar parts of the refri-
gerator. This will cause the product
to fall down and cause damage to
the parts.
•
Take care not to trap the power cab-
le.
1.1.1 HC warning
If the product comprises a cooling
system using R600a gas, take care to
avoid damaging the cooling system
and its pipe while using and moving
the product. This gas is flammable. If
the cooling system is damaged, keep
the product away from sources of fire
and ventilate the room immediately.
C
The label on the inner left
side indicates the type of
gas used in the product.
1.1.2 For models with
water dispenser
•
Pressure for cold water inlet shall be
maximum 90 psi (620 kPa). If your
water pressure exceeds 80 psi (550
kPa), use a pressure limiting valve
in your mains system. If you do not
know how to check your water pres-
sure, ask for the help of a professio-
nal plumber.
•
If there is risk of water hammer ef-
fect in your installation, always use